Table of Contents
Advertisement
GENERAL INFORMATION
28
Keyless Ignition
The keyless ignition system allows the
motorcycle to be started without the
use of a mechanical key.
Smart Key Operation
To turn the motorcycle on with the
keyless ignition:
▼ The smart key must be within close
proximity (three feet/one meter) of
a system sensor. There is a system
sensor located on the right hand
side of the motorcycle, and another
system sensor located at the front
of the motorcycle. If the smart key
is out of range of a system sensor
then it will be unresponsive and the
keyless ignition cannot be activated.
1.
Status symbol light
2.
ON/OFF button
▼ Press the ON/OFF button on the
smart key to turn the key on. The
status symbol light shows green
briefly to indicate that the smart
key is on.
▼
button shows the status of the
smart key; red is OFF and green is
ON.
▼
button will change the status to
OFF or ON after briefly showing the
original status color first.
▼ If the smart key battery is flat, then
use the smart key in the passive key
operation method.
For
more
the engine with keyless ignition, see
page 104.
Passive Key Operation
1
To turn the motorcycle on with the
passive key (or the smart key if the
battery is discharged):
2
▼ The
beneath the passenger seat. Access
the system sensor from the left
hand side of the motorcycle.
A short press on the ON/OFF
A long press of the ON/OFF
information
on
system
sensor
starting
is
located
Advertisement
Chapters
Table of Contents
