Operation - Triumph Tiger 1200 GT 2021 Owner's Handbook Manual

GENERAL INFORMATION
76
If the motorcycle has been involved
in an accident, the blind spot radar's
functionality may have been affected.
It is advised that the motorcycle is
taken to an authorized Triumph dealer
to have the blind spot radar checked.
The blind spot radar's ability to detect
a vehicle in the rider's blind spot
may be affected and give incorrect
indications.
motorcycle accident.
Only use
accessories.
accessories
to equip
impacting the blind spot radar sensor
range, when installed correctly.
Riders should be aware that only
approved accessories for any Triumph
motorcycle are those which carry
official Triumph approval and are
installed to the motorcycle by an
authorized Triumph dealer.
The installation of any non-approved
parts, accessories or conversions may
adversely affect the handling, stability
or other aspect of the motorcycle
operation that may result in an
accident causing injury or death.
Warning
This may lead
Warning
Triumph approved
Triumph approved
have been designed
the motorcycle
The blind spot radar may not function in
the following situations:
▼ in the presence of specific types of
motorcycles
▼ in the presence of vehicles with high
ground clearance
▼ the
speeds under 12 mph (20 km/h).
▼ the motorcycle is traveling with a
high degree of lean angle
▼ the motorcycle's ABS has been
to a
deactivated
▼ a high sided vehicle is passing/
overtaking the motorcycle
▼ another vehicle is overtaking the
motorcycle at a very high, relative
speed
▼ the motorcycle is weaving through
lanes of stationary traffic.
without
The blind spot radar may not detect the
following:
▼ Bicycles and scooters
▼ Pedestrians and animals
▼ Oncoming vehicles and objects
▼ Stationary objects such as parked
cars, road works, motorway barriers,
etc.
It is recommended to always ride with
extreme caution and be aware of all
vehicles and situations.

Operation

Before
radar, make sure that all the correct
conditions have been met as described
on page 75.
To enable and disable the blind spot
radar, access the Bike - Settings menu
and follow the procedure described on
page 57.
motorcycle is traveling
enabling the blind
at
spot