MAINTENANCE
148
Front Fork Inspection
Inspecting the Front Forks
To inspect the front forks:
▼ Position the motorcycle on level
ground.
▼ While holding the handlebars and
applying the front brake, pump the
forks up and down several times.
▼ If roughness or excessive stiffness
is detected, consult your authorized
Triumph dealer.
▼ Examine each fork for any sign of
damage, scratching of the slider
surface, or for oil leaks.
▼ If any damage or leakage is found,
consult
dealer.
an
authorized
Triumph
Bank Angle Indicators
Warning
Always
replace
indicators before they are worn to
their maximum limit.
Use of a motorcycle with bank angle
indicators worn beyond the maximum
limit will allow the motorcycle to be
banked to an unsafe angle.
Banking to an unsafe angle may cause
instability, loss of motorcycle control
and an accident.
Bank angle indicators are located on the
rider's footrests.
1
1.
Bank angle indicator
2.
Maximum wear limit
Bank angle indicators must be replaced
when they have worn down to the
maximum wear limit. The maximum
wear limit is shown by a groove on the
bank angle indicator. Regularly check
the bank angle indicators for wear.
the
bank
angle
2