Table of Contents
Advertisement
Converter 2 x 0...10 V / IO-Link
3 Intended use
The unit is used to detect signals from a connected sensor or another device with an analogue output
(0...10 V). It has two analogue voltage inputs.
IN1 (analogue)
DP1222
IN2 (analogue)
Fig. 1: Inputs/outputs of the unit
The unit operates as an "analogue/IO-Link converter".
A maximum of 11 V may be applied to each input. Otherwise, the accuracy of the respective
other channel will be negatively affected.
If the LED IN1 / IN2 flashes and the IO-Link event "Process value above valid range" (0x8C10)
is present, the accuracy of the other channel can no longer be guaranteed.
The unit is not suited for environments with particular requirements on mechanical stability (e.g.
shock/vibration).
The unit is intended for indoor use only.
u Observe the operating conditions (Ò Technical data at www.ifm.com).
IO-Link C/Q
DP1222
5
Advertisement
Table of Contents
