AS-i flat cable splitter E70354 E70372 1 Preliminary note You will find instructions, technical data, approvals, accessories and further information using the QR code on the unit / packaging or at www.ifm.com. 1.1 Symbols used Requirement Instructions Reaction, result [...] Designation of keys, buttons or indications...
E70354 E70372 AS-i flat cable splitter 2 Safety instructions • The unit described is a subcomponent for integration into a system. – The system architect is responsible for the safety of the system. The system architect undertakes to perform a risk assessment and to create documentation in accordance with legal and normative requirements to be provided to the operator and user of the system.
AS-i flat cable splitter E70354 E70372 3 Intended use The flat cable insulation displacement connector allows tapping the AS-i voltage and the external auxiliary voltage via the M12 socket (current rating 2 A AS-i / 2 A AUX → Technical data).
E70354 E70372 AS-i flat cable splitter 4 Installation u Disconnect the power to the machine during installation. u Remove protective cap for M12 socket when the plug is connected (→ Step 3). The M12 connection parts in the device correspond to the M12 standard. To ensure compliance with the protection rating, only use cables that correspond to the M12 standard.
Page 7
AS-i flat cable splitter E70354 E70372 u Insert the yellow AS-i flat cable (2) into the cable duct “AS-i”. u Insert the black 24 V flat cable (3) into the other cable duct. If no additional power supply is required:...
Page 8
E70354 E70372 AS-i flat cable splitter u Lay flat cables; straight for a minimum of 15 cm. u If necessary, use the optional AS-i clips (6) (→ Accessories). u Provide all outgoing cables (AS-i flat cables and M12 cable) with a suitable strain relief max. 1 m 15 cm behind the cable entry.
AS-i flat cable splitter E70354 E70372 5 Electrical connection The unit must be connected by a qualified electrician. u Observe the national and international regulations for the installation of electrical equipment. u Disconnect power. u Connect the unit as follows: Connection...
E70354 E70372 AS-i flat cable splitter 6 Maintenance, cleaning, repair and disposal 6.1 Maintenance The unit is maintenance-free. 6.2 Cleaning the housing surface u Disconnect the device. u For wet cleaning and pressure cleaning, observe the conditions of the device's protection rating (→...