Passive power distributor
3 Intended use
The passive power distributor can be used to supply IO-Link masters or AS-i modules and intelligent
sensors/actuators.
Each supply connection (AS-i operation: AS-i / AUX; IO-Link operation: US / UA) has overcurrent
detection (no shutdown).
• AC5050: 4-port power distributor
• AC5051: 8-port power distributor
The device is designed for use without a control cabinet (indoor use).
The impedance of the power distributor corresponds to that of a standard slave in the AS-i
network.
u Only use the device within the limits of the technical data.
3.1 Safety symbol on the device
Safety symbol on the device:
u Adhere to the operating instructions for the safe operation of the
unit.
AC5050 AC5051
5