Table of Contents
Advertisement
Installation Requirements
This shower mixer valve must be installed in com-
pliance with current Water Regulations. If you have
any doubts about the Water Regulation requirements
contact your local water services provider or use the
services of a professional plumber.
This mixer valve is suitable for use with the following
water supply systems:
Gravity Fed Hot and Cold (pressure balanced) 0.1 - 1.0 bar
Gas Combination Boiler (multi-point) 1.0 - 10 bar*
Unvented System (pressure balanced) 1.0 - 10 bar
Pumped System 1.0 - 10 bar
IMPORTANT: If you install this mixer with a
gravity fed system, there must be a minimum head
(vertical distance) from the underside of tlie cold
water storage tank to the showerhead position of
at least 1 metre.
Before connecting the mixer, water should be flushed
through the system to remove all debris that might
otherwise damage the valve.
* If pressure is in excess of 3.5 bar, a pressure-
reducing valve should be fitted.
KEY
Isolating valve
Reducing valve
Mixer Valve
Pump
Gravity Fed Hot and Cold (pressure balanced)
Gas Combination Boiler (multi-point)
Advertisement
Table of Contents
