Intended Use - Elatec TWN4 MULTITECH 3 M BLE User Manual

2 INTENDED USE

TWN4 MultiTech 3 M BLE integrates RFID (125 kHz and 13.56 MHz), NFC and Bluetooth Low Energy capabilities into a compact but
powerful reader. Its reduced size combined with optimized read/write performance makes it the perfect reader for all applications where
small size and full performance matters, e.g. print solutions, driver identification, POS integration and many more. Furthermore, TWN4
MultiTech 3 M BLE provides access to most common host interfaces such as USB, serial (TTL) or I²C which are readily accessible
through an on-board connector.
The product is intended to be integrated into a host device.
Any use other than the intended use described in this section, as well as any failure to comply with the safety information given in this
document, is considered improper use. ELATEC excludes any liability in case of improper use or faulty product installation.
© 2022 ELATEC GmbH – TWN4 MultiTech 3 M BLE user manual DocRev3 – 02/2022 Page 4 of 15