Intended Use - Elatec MULTITECH 2 LEGIC M User Manual

Hide thumbs Also See for MULTITECH 2 LEGIC M:

Table of Contents

2 INTENDED USE

The contactless RFID readers and modules of the ELATEC TWN4 MultiTech 2 LEGIC family are a direct enhancement of the TWN4

MultiTech LEGIC readers with the same form factors (PCB modules and desktop readers with housing). During the development of

the TWN4 MultiTech 2 LEGIC family, special emphasis has been placed on optimizing the HF performance (13.56 MHz). Compared

to the predecessor TWN4 MultiTech LEGIC, the read range could be increased by more than 50% for LEGIC transponders and even

doubled for some HF transponders.

TWN4 MultiTech 2 LEGIC M key features include a powerful SDK for writing apps that are executed directly on the module, the

possibility to upgrade the firmware in the field, a direct chip-commands support, and a powerful BLE module. Additionally, the module

can simultaneously read more than 60 RFID technologies from low (LF) and high frequency (HF) bands, including NFC. This gives the

option to select as many of the technologies required instead of being forced to select just a few ones.

The product is intended to be integrated into a host device.

Any use other than the intended use described in this section, as well as any failure to comply with the safety information

given in this document, is considered improper use. ELATEC excludes any liability in case of improper use or faulty product

installation.

Page 4 of 14

Table of Contents

Do you have a question about the MULTITECH 2 LEGIC M and is the answer not in the manual?