Recording Backsight Data; Set Backsight Point By Angle; Set Backsight Point By Coordinate - Kolida KTS440 Series Manual

Mode：Press
· To set the atmospheric correction factor to 0 ppm: 0PPM

21.2 Recording backsight data

It allows you to record backsight point data by 2 ways：
· set backsight point by angle
· set backsight point by coordinate

21.2.1 Set backsight point by Angle

It allows you to set backsight azimuth angle by inputting angle value directly.
Steps
Operation procedures
⑴ Under coordinate measurement screen, usd▲▼
to select "2. Back sight data" p etting(or press
numeric key 2), displays as right, choose"1. angle".
⑵
Input Azimuth and press OK key.
⑶
Sight at backsight point and press YES.
⑷ Finish azimuth z ettingand returns to previous
menu

21.2.2 Set backsight point by coordinate

You can set backsight azimuth angle by inputting backsight coordinate, the machine calculates azimuth angle by
station point coordinate and backsight coordinate.
to select (Fine[r], Fine AVG [n], Fine[s], Tracking)
"1.Angle"
Input angle
Key Display
Back Sight Data
1. Angle
2. Coord.
Set Azimuth
value
HAR：
＋
OK
Set Azimuth
Sight BS point
YES
HAR：
1.Stn data
2. back sight data
3. angle data
4. dist data
5. Coord data
6. dist+ coord data
5
OK
0°00'00"
NO YES
A:\JOB01
149