Recording Coordinates Data - Kolida KTS440 R Series Manual

19.2.2 Set backsight point by coordinate
You can set backsight azimuth angle by inputting backsight coordinate, the machine calculates azimuth
angle by station point coordinate and backsight coordinate.
Operation Procedure
In backsight setting menu, choose "2.coord.".
⑴
After inputting backsight point coordinate NBS,
⑵
EBS, ZBS, after each entry press ENT, then
pressOK . To use value in memory, press Readkey.
the machine calculates backsight azimuth by
⑶
station point coordinate and backsight point
coordinate, screen shows as right.(HAR is the
backsight azimuth)
Sight at backsight point, press
⑷
and returns to coordinate measurement menu
screen.
19.3 Recording Angle Measurement Data
·It is possible to record angle measurement data only in a JOB after entering Record Mode.
·Once the data has been recorded. REC can not be displayed in order to prevent double recording.
·It is convenient to use AUTO to perform automatic operation from angle measurement to recording.
·The items which can be recorded are the vertical angle, horizontal angle, point number, code, and target
height.
PROCEDURE
Key
"2 Coord"
Input
backsight
point
coordinate
+
ENT
+
OK
YES, finish setting
Display
Backsight data
1. Angle
2. Coord.
Back sight point
NBS ： 1382.450
EBS ： 3455.235
ZBS ： 1234.344
READ
Set Azimuth
Sight BS Point
HAR： 40°00'00"
NO
Coordinate
1. Observation
2. Stn data
3. Back sight data
OK
YES
139