Table of Contents
Advertisement
Reference Information
Specifications
N
*Appropriate DVI-D to HDMI cables or adapters are required for
HDMI signal input/output.
Also, an optional Extron HDMI-to-DVI adapter is required in order to
transmit a CEC signal.
Video
Maximum data rate....................... 4.95 Gbps (1.65 Gbps per color)
Maximum pixel clock ................... 165 MHz
Resolution range ........................... 1920x1200 or 1080p @ 60 Hz
Formats ........................................... RGB and YCbCr digital video
Standards........................................ DVI 1.0, HDMI 1.2
Video input and loop through— transmitters
Number/signal type..................... 1 single link DVI-D (or HDMI*) input
Connectors
DVI 201 Tx/Rx................... 2 female DVI-D
DVI 201 A D Tx/Rx........... 2 female DVI-I
Interconnection between transmitter and receiver
Connectors ..................................... (2) RJ-45 per unit for 2 CAT 5/5e/6/7
Termination standards.................. TIA/EIA T568A or T568B. Pin
Signal transmission distance
1900x1200 or 1080p @ 60 Hz
CAT 5/5e/6/7 STP ... Up to 125' (38 m)
CAT 5/5e/6/7 UTP .. Up to 100' (30 m)
1024x768 or 720p/1080i @ 60 Hz
CAT 5/5e/6/7 UTP or STP
N
The transmission distance varies greatly depending on the signal
resolution and on the type of cable, graphic card, and display used in the
system.
DVI 201 Tx/Rx • Reference Information
A-2
1 single link DVI-D (or HDMI*) local loop-
through
UTP (unshielded twisted parir) or STP
(shielded twisted pair) cables connecting
the transmitter and receiver
configurations for each standard are
available in the manual's installation
chapter.
Up to 200' (60 m)
Video output— receivers
Number/signal type..................... 1 single link DVI-D (or HDMI*)
Connectors
DVI 201 Tx/Rx................... 2 female DVI-D
DVI 201 A D Tx/Rx........... 2 female DVI-I
Audio— DVI 201 A D Tx/Rx
Gain ................................................. Unbalanced output: 0 dB;
Frequency response ...................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise .................................. 0.10% @ 1 kHz at nominal level
S/N.................................................. >85 dB at maximum output (unweighted)
Stereo channel separation ............ >86 dB @ 1 kHz
Audio input— DVI 201 A D Tx/Rx
Number/signal type
DVI 201 A D Tx.................. 1 stereo, unbalanced
DVI 201 A D Rx.................. 1 stereo, balanced/unbalanced
Connectors
DVI 201 A D Tx.................. (1) 3.5 mm mini audio jack (tip, ring, sleeve)
DVI 201 A D Rx.................. (1) 3.5 mm captive screw connector, 5 pole
Impedance
DVI 201 A D Tx.................. >10k ohms unbalanced, DC coupled
DVI 201 A D Rx.................. >18k ohms unbalanced, 14k ohms
Nominal level
DVI 201 A D Tx.................. -10 dBV (316 mVrms)
DVI 201 A D Rx.................. +4 dBu (1.23 Vrms)
Maximum level
DVI 201 A D Tx.................. +11 dBu, unbalanced at 1% THD+N
DVI 201 A D Rx.................. +16.8 dBu, unbalanced at 1% THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
N
Audio output— DVI 201 A D Tx/Rx
Number/signal type
DVI 201 A D Tx.................. 1 stereo, balanced/unbalanced
DVI 201 A D Rx.................. 1 stereo, unbalanced
Connectors
DVI 201 A D Tx.................. (1) 3.5 mm captive screw connector, 5 pole
DVI 201 A D Rx.................. (1) 3.5 mm mini audio jack (tip, ring, sleeve)
DVI 201 Tx/Rx • Reference Information
balanced output: +6 dB
balanced, DC coupled
A-3
Advertisement
Table of Contents
