Ethernet Ports - RuggedCom RuggedServer RS416 Installation Manual

5.3.2 Ethernet Ports

5.3.2.1 Copper Ports
Parameter
Speed
Duplex
Cable-Type
Wiring Standard
Max Distance
Connector
Isolation
Table 11: Ethernet Ports - Copper Specifications
5.3.2.2 Fiber Optic Ports
The following sections detail fiber optic specifications on ports that can be ordered with the RS416.
The user determines the type of optics at time of ordering and can determine the modules installed
on a particular unit by reading the factory data file via the ROS
section provides detailed specifications of fiber optic modules.
The dual-port fast Ethernet optical specifications for slots 5 and 6 are shown in Table 12 organized
by module order code. Module order codes are contained within each product's factory data when
assembled and configured at the factory. Consult ROS
installed in a particular product.
Optics Mode /
Order Code Connector
12-11-0011 MM / ST
12-11-0012 SM / ST
12-11-0007 MM / ST
12-11-0009 MM / SC
12-11-0008 MM / MTRJ
12-11-0046 MM / LC
12-11-0006 SM / ST
12-11-0005 SM / SC
12-11-0004 SM / LC
12-11-0031 SM / SC
12-11-0032 SM / LC
12-11-0033 SM / SC
12-11-0034 SM / LC
Table 12: Ethernet Ports – Fiber Optic Specifications
©
2008 RuggedCom Inc. All rights reserved
All manuals and user guides at all-guides.com
Specification
10/100 Mbps
FDX / HDX
> Category 5
TIA/EIA T568A/B
100 m
RJ45
1.5 kV
Cable
Tx Pwr
λ λ λ λ
Tx
Type 2
(dBm)
(nm)
µ µ µ µ m) (Min/Max)
(
850 50/125 -16.5/-10.6
-27 / -14
1310 9/125
1310 50/125
1310 50/125 -19 / -14
1310 9/125 -15/-8
1310 9/125
1310 9/125
31
Shielded/Unshielded
Auto-Crossover, Auto-polarity
TM user interface. The following
TM
to determine the optical assemblies
Rx
3 Sensitivity Saturation
(dBm) 3
-34
-35
-15.7 -33.5
-32
-32
-5 / 0 -35
0 / 5 -37
Notes
Auto-negotiating
Auto-negotiating
RMS 1-minute
Rx Typical Power
Distance Budget
(dBm) 3 (km) 1 (dB)
-11.2 2 21
-3 5 8
-11 2 17
-14 2 15
-7 20 16.5
-3 50 32.5
0 90 39.5
Rev104