Install Hardware (Sg100 And Sg1000); Register Hardware; Install Appliance Into A Cabinet Or Rack (Sg100 And Sg1000) - NetApp SG100 Install

Install hardware (SG100 and SG1000)

Register hardware

Registering the appliance hardware provides support benefits.
Steps
1. Locate the chassis serial number for the appliance.
You can find the number on the packing slip, in your confirmation email, or on the appliance after you
unpack it.
2. Go to the NetApp Support Site at mysupport.netapp.com.
3. Determine whether you need to register the hardware:
If you are a...
Existing NetApp customer
New NetApp customer

Install appliance into a cabinet or rack (SG100 and SG1000)

You must install a set of rails for the appliance in your cabinet or rack, and then slide the
appliance onto the rails.
What you'll need
• You have reviewed the Safety Notices document included in the box, and understand the precautions for
moving and installing hardware.
• You have the instructions packaged with the rail kit.
Steps
Follow these steps...
a. Sign in with your username and password.
b. Select Products > My Products.
c. Confirm that the new serial number is listed.
d. If it is not, follow the instructions for new NetApp
customers.
a. Click Register Now, and create an account.
b. Select Products > Register Products.
c. Enter the product serial number and requested
details.
After your registration is approved, you can
download any required software. The approval
process might take up to 24 hours.
1