Oscillating Plate Assembly - Blizzard 760TR Installation Instructions & Owner's Manual

OSCILLATING PLATE ASSEMBLY – ALL MODELS
1. Attach the oscillating plate to the tractor now.
2. Route the loose hoses (from Ports "T", "P2", and
"P3" on 810TR and 8611TR models; from angle
rams on 760TR, 860TR, and 8600TR models)
through the clamp on left side of oscillating plate.
NOTE: Route the hoses so they do not get
pinched during use.
1/4
1/4
B70201
Kramer High
70243
Euro
Upper
70244
B70221
Euro
Kunta
Lower
Lit. No. B64092, Rev. 09
TYP B
1/4
TYP
1/4 2.0-8.5
70229 B70225
O&K Upper Trima
70227
O&K
Lower
The tractor-specifi c hooks come pre-welded
on the oscillating plate assembly. Refer to the
illustrations below for hook identifi cation. If welding
the tractor-specifi c hooks is necessary, measure
the distance on the tractor to determine appropriate
placement of the hooks on the oscillating plate. Refer
to the illustration below for weld specifi cations.
1/4
1/4
D
B TYP
1/4
TYP
D
TYP
1/4
2.0-8.5
TYP
B70237
Volvo
B70233 B70242
Vila Zettelmeyer
21
B70202
3-Point Hitch
April 15, 2021