Argos Sparkle 427/5484 Assembly Instructions Manual

3 door mirrored robe

Hide thumbs

page of 20

/ 20
Bookmarks

Quick Links

Download this manual

Sparkle - 3 Door Mirrored Robe

Assembly Instructions -

Dimensions

Width - 105.1cm

Depth - 51.6cm

Height - 182.3cm

Important -

Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800

Please keep for future reference

427/5484

395/5640

428/4767

MADE IN

BRITAIN

Issue 1 - 08/06/15

Need help?

Do you have a question about the Sparkle 427/5484 and is the answer not in the manual?

Questions and answers

Summary of Contents for Argos Sparkle 427/5484

Page 1 Sparkle - 3 Door Mirrored Robe Assembly Instructions - 427/5484 Please keep for future reference 395/5640 428/4767 Dimensions Width - 105.1cm Depth - 51.6cm MADE IN Height - 182.3cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800 Issue 1 - 08/06/15...
Page 2: Care And Maintenance
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 68kgs. space to layout the parts before recommend the Please lift with care. starting.
Page 3 If you have damaged or missing components, call the Components - Panels Customer Helpline: 03456 400800 quoting the reference numbers below Please check you have all the panels listed below (DF3844) (105.1 x 51.6cm) 5 Base (DF3846) (101.7 x 49.3cm) Left Side Right Side Divider...
Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 03456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Page 5 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 03456 400800 quoting the reference numbers below Step 1 Prepare the left side 10mm Screw 4 metal dowels into the left side Note: Tighten the metal dowels up fully against the panels.
Page 6 Assembly Instructions Step 2 Prepare the right side Screw 4 metal dowels into the right side Insert 2 large locking nuts into the right side Finished front edge Tap 2 wooden dowels into the right side Fit 4 hinge plates onto the right side making sure that the slot is facing towards the...
Page 7 Assembly Instructions Step 4 Fit the base to the right side Push the base onto the right side Use a screwdriver to tighten the 2 large Finished front edge locking nuts fitted to the base Note: Turn the large locking nuts as far as they will go - more than 1/2 a turn.
Page 8 Assembly Instructions Step 6 Finished Prepare the small rail front edge Insert 2 large locking nuts into the small rail Tap a wooden dowel into the small rail Step 7 Finished Fit the small rail front edge Push the small rail onto the right side Note: Support the small Use a screwdriver to...
Page 9 Assembly Instructions Step 9 Prepare the plinth Insert 2 large locking nuts into the plinth Tap 2 wooden dowels into the plinth Step 10 Fit the plinth Push the plinth onto the right side Use a screwdriver to tighten the large locking fitted to the plinth Step 11 Prepare the large rail...
Page 10 Assembly Instructions Step 12 Fit the large rail Push the large rail Finished onto the divider front edge Use a screwdriver to tighten the large locking fitted to the large rail Note: Support the large rail until the left side has been fitted in the next step.
Page 11 Assembly Instructions Step 15 Polystyrene block Fit the top Note: To make it easier to fit the top, place polystyrene blocks from the packaging underneath the side and divider panels to raise the assembly. Push the top onto the assembly. Use a screwdriver to tighten the 2 large locking nuts...
Page 12 Assembly Instructions Step 17 Fit the 2 back panels The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Square up the unit by making sure that measurement x:x equals y:y.
Page 13 Assembly Instructions Step 18 Fit the shelf studs For each of the 3 shelves , insert 4 shelf studs Step 19 Fit the shelves Lower the 3 shelves down onto the shelf studs...
Page 14 Assembly Instructions Step 20 Fit the hanging rail Push the hanging rail into the rail holders fitted to the side panels. Step 21 Prepare the 3 doors Push fit 4 hinges into each of the 2 plain doors and the mirror door Secure each hinge with 2 screws...
Page 15 Assembly Instructions Step 22 Fit doors and handles Note: The easiest way to attach each door is to fit the top hinge first, then align and fit the other hinges. Push the hinge onto the front part of the hinge plate The recess at the bottom of screw B goes into the slot in the hinge plate.
Page 16 Assembly Instructions Step 23 Adjust the doors if needed Before adjusting the doors, use a spirit level to check the base (or top) of the unit is level, front-to-back and side-to-side in the 3 positions shown. Use suitable packing pieces (not supplied) to make the unit level BEFORE making any adjustment to the hinges,...
Page 17 Assembly Instructions Step 24 Screw Fit the overbalance Washer protector Wall fixing Strap (not supplied) Strap To prevent possible Washer overbalancing we recommend that this unit Screw is secured to a suitable (not supplied) wall by fitting of the overbalance protector kit to the unit, or an alternative fixing method of your choice.
Page 18 KEEP THESE INSTRUCTIONS FOR FUTURE USE If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW...
Page 20 ALR3195...

This manual is also suitable for:

Sparkle 395/5640 Sparkle 428/4767