Argos Kensington 424/7429 Assembly Instructions Manual

Argos Kensington 424/7429 Assembly Instructions Manual

3 drawer 3 door robe

Advertisement

Kensington - 3 Drawer 3 Door Robe

Dimensions

Width - 127.4cm
Depth - 49.5cm
Height - 198.8cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: Help@ClickSpares.co.uk (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020
Please keep for future reference
424/7429
402/7216
MADE IN
BRITAIN
Issue 1 - 19/06/15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kensington 424/7429 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Argos Kensington 424/7429

  • Page 1 Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928.
  • Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 85kgs. space to layout the parts before recommend the Please lift with care. starting.
  • Page 3 Components - Panels If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020...
  • Page 4 Components - Panels If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020...
  • Page 5 Components - Fittings If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly.
  • Page 6 Assembly Instructions Step 1 Prepare the 3 drawer fronts Screw 2 metal dowels into each of the 3 drawer fronts Note: Tighten the metal dowels up fully against the panels. Step 2 Prepare the drawer sides Insert a small locking into the hole shown on the left drawer side...
  • Page 7 Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer back Fit the drawer back between the drawer sides Make sure that the drawer base...
  • Page 8 Assembly Instructions Step 8 Prepare the divider Place 3 runners the divider as shown. Slide back the top of runner and use the 2nd hole from the front to fit the 1st screw Finished front edge Fit 3 hinge plates onto the divider , making...
  • Page 9 Assembly Instructions Step 9 Turn the divider over and prepare its other surface Screw 5 metal dowels into the divider To fit the rail holder Finished front edge screw through the top hole with screw into the mark hole drilled in the divider .
  • Page 10 Assembly Instructions Step 12 Prepare the narrow base Narrow Base (DF3779) (40 x 47.4cm) Insert 4 large locking nuts into the narrow base Narrow Shelf (DF3778) Tap 4 wooden dowels (40 x 45cm) into the narrow base Finished front edge Step 13 Fit the narrow base to the divider...
  • Page 11 Assembly Instructions Step 15 Fit the narrow rail Position the narrow rail up against the 2 holes in the divider Tap a double metal dowel through the divider and into the narrow rail until it ‘’bottoms out’’. Tap a large wooden dowel through the divider...
  • Page 12 Assembly Instructions Step 17 Fit the narrow rail to the divider Push the narrow rail onto the divider Use a screwdriver to tighten the large locking fitted to the narrow rail Step 18 Prepare the narrow shelf Insert 4 large locking nuts into the narrow shelf...
  • Page 13 Assembly Instructions Step 20 Prepare the right side Screw 6 metal dowels into the right side Insert 2 large locking nuts into the right side Finished front edge Tap 2 wooden dowels into the right side Fit 4 hinge plates onto the right side making sure that the slot is facing towards the...
  • Page 14 Assembly Instructions Step 22 Prepare the left side Place 3 runners the left side Finished shown. Slide back the front edge top of runner and use the 2nd hole from the front to fit the 1st screw Fit 3 hinge plates onto the left side , making...
  • Page 15 Assembly Instructions Step 23 Prepare 4 rails Insert 2 large locking nuts into 4 of the rails Tap 2 wooden dowels into 4 of the rails Step 24 Prepare the other rail Insert 2 large locking nuts into the rail Tap 1 wooden dowel into the rail Step 25...
  • Page 16 Assembly Instructions Step 26 Fit the left side Push the left side onto the assembly. Use a screwdriver to tighten the 7 large locking nuts fitted to the large shelf the 5 rails Step 27 Prepare the top Screw 6 metal dowels into the top...
  • Page 17 Assembly Instructions Polystyrene Step 28 block Fit the top Polystyrene Note: To make it easier block to fit the top and plinths, place polystyrene blocks from the packaging underneath the side and divider panels Polystyrene Polystyrene to raise the block block assembly.
  • Page 18 Assembly Instructions Step 30 The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Fit the 2 back panels Square up the unit by making sure that measurement x:x equals y:y.
  • Page 19 Assembly Instructions Step 31 Fit the 4 plastic nails Tap 2 plastic nails into the bottom edge of each of the sides and the divider Step 32 Finished Prepare a side plinth top edge Insert a large locking into 1 of the side plinths Tap a wooden dowel into the side plinth...
  • Page 20 Assembly Instructions Step 34 Prepare the front plinth Screw 2 metal dowels Profiled into the front plinth top edge Step 35 Finished top edge Fit the plinths together Push the 2 side plinths onto the front plinth Profiled Finished top edge top edge Use a screwdriver to tighten the large locking...
  • Page 21 Assembly Instructions Step 37 Fit the drawers Starting with the bottom drawer, slide both the runners forward and locate the drawer sides between them, lining up the holes in the drawer wrap with the 2nd 'threaded' holes in the runners Working from the inside of the drawer, insert 2 screws...
  • Page 22 Assembly Instructions Step 39 Prepare the 2 small doors Push fit 3 hinges into each of the 2 small doors Secure each hinge with 2 screws Note: Before securing with the screws, make sure that the hinges are positioned at 90 degrees with the edge of the door.
  • Page 23 Assembly Instructions Step 41 Fit doors and handles Note: The easiest way to attach each door 19 20 is to fit the top hinge first, then align and fit the other hinges. Push the hinge onto the front part of the hinge plate The recess at the bottom of screw B goes into the...
  • Page 24 Assembly Instructions Step 42 Adjust the doors if needed Before adjusting the doors, use a spirit level to check the base (or top) of the unit is level, front-to-back and side-to-side in the 3 positions shown. Use suitable packing pieces (not supplied) to make the unit level BEFORE making any adjustment to the hinges,...
  • Page 25 Assembly Instructions Step 43 Screw Fit the overbalance Washer protector Wall fixing Strap (not supplied) Strap To prevent possible Washer overbalancing we recommend that this unit Screw is secured to a suitable (not supplied) wall by fitting of the overbalance protector kit to the unit, or an alternative fixing method of your choice.
  • Page 26 Assembly Instructions Step 44 Assembly is complete If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020...
  • Page 28 ALR3178...

This manual is also suitable for:

Kensington 402/7216

Table of Contents