Advertisement
Quick Links
Sparkle - 1 Drawer 3 Door Robe
Assembly Instructions -
Dimensions
Width - 105.1cm
Depth - 51.6cm
Height - 182.3cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: Help@ClickSpares.co.uk (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020
Please keep for future reference
408/5935
425/5954
397/9468
MADE IN
BRITAIN
Issue 1 - 10/06/15
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Argos 408/5935
Summary of Contents for Argos 408/5935
- Page 1 Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928.
-
Page 2: Care And Maintenance
Take to your local authority waste disposal centre. Components - Panels If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. - Page 3 Components - Panels If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020...
- Page 4 Components - Fittings If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly.
- Page 5 Assembly Instructions Ruler Use this ruler to help correctly identify the screws 100 110 120 130 140 150 160 170 Step 1 Prepare the drawer front Screw 2 metal dowels into the drawer front Note: Tighten the metal dowels up fully against the panels.
- Page 6 Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer back Fit the drawer back between the drawer sides Make sure that the drawer base...
- Page 7 Assembly Instructions Step 8 Prepare the left side Place a runner the left side shown. Slide back the top of runner and use the 2nd hole from the front to fit the 1st screw Finished front edge Slide the runner back the other way and fit the 2nd screw into...
- Page 8 Assembly Instructions Step 9 Finish preparing the 10mm left side Screw 6 metal dowels into the left side Note: Tighten the metal dowels up fully against the panels. Finished front edge Insert 2 large locking nuts into the left side Note: The arrow on the locking nut must point towards the hole in the...
- Page 9 Assembly Instructions Step 10 Prepare the right side Screw 4 metal dowels into the right side Insert 2 large locking nuts into the right side Finished front edge Tap 2 wooden dowels into the right side Fit 4 hinge plates onto the right side making sure that the slot is facing towards the...
- Page 10 Assembly Instructions Step 12 Fit the base to the right side Push the base onto the right side Use a screwdriver to tighten the 2 large Finished front edge locking nuts fitted to the base Note: Turn the large locking nuts as far as they will go - more than 1/2 a turn.
- Page 11 Assembly Instructions Step 14 Finish preparing the divider Screw 2 metal dowels into the divider Insert 2 large locking nuts into the divider Tap 4 wooden dowels into the divider To fit the rail holder Finished screw through the top front edge hole with screw into the mark hole drilled...
- Page 12 Assembly Instructions Step 16 Fit the horizontal to the divider Push the horizontal onto the divider Use a screwdriver to Finished tighten the 2 large front edge locking nuts fitted to the horizontal Finished front edge Step 17 Prepare the small rail Insert 2 large locking Finished nuts...
- Page 13 Assembly Instructions Step 19 Fit the divider Push the divider onto the base attach it using 2 screws Tap a double metal dowel through the divider and into the small rail until it ‘’bottoms out’’. Tap a large wooden dowel through the divider and into the...
- Page 14 Assembly Instructions Step 21 Fit the plinth Push the plinth onto the right side Use a screwdriver to tighten the large locking fitted to the plinth Step 22 Prepare the large rail Finished Insert 2 large locking front edge nuts into the large rail Tap a wooden dowel into the large rail...
- Page 15 Assembly Instructions Step 24 Fit the left side Push the left side onto the assembly. Use a screwdriver to tighten the 6 large locking nuts fitted to the base , the horizontal , the plinth and the large rail Step 25 Prepare the top Screw 6 metal dowels into the top...
- Page 16 Assembly Instructions Step 26 Polystyrene block Fit the top Note: To make it easier to fit the top, place polystyrene blocks from the packaging underneath the side and divider panels to raise the assembly. Push the top onto the assembly. Use a screwdriver to tighten the 2 large locking nuts...
- Page 17 Assembly Instructions Step 28 Fit the 2 back panels The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Square up the unit by making sure that measurement x:x equals y:y.
- Page 18 Assembly Instructions Step 29 Fit the hanging rail and shelves Push the hanging rail into the rail holders fitted to the side panels. For each of the 3 shelves , insert 4 shelf studs Lower the 3 shelves down onto the shelf studs Step 30 Fit the drawers...
- Page 19 Assembly Instructions Step 31 Prepare the right door Push fit 4 hinges into the right door Secure each hinge with 2 screws Note: Before securing with the screws, make sure that the hinges are positioned at 90 degrees with the edge of the door.
- Page 20 Assembly Instructions Step 33 Fit doors and handles Note: The easiest way to attach each door 17 18 is to fit the top hinge first, then align and fit the other hinges. Push the hinge onto the front part of the hinge plate The recess at the bottom of screw B goes into the...
- Page 21 Assembly Instructions Step 34 Adjust the doors if needed Before adjusting the doors, use a spirit level to check the base (or top) of the unit is level, front-to-back and side-to-side in the 3 positions shown. Use suitable packing pieces (not supplied) to make the unit level BEFORE making any adjustment to the hinges,...
- Page 22 If in doubt, consult an expert. Assembly is complete If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020...
- Page 24 ALR3196...
Need help?
Do you have a question about the 408/5935 and is the answer not in the manual?
Questions and answers