Advertisement
INSTALLATION
MANUAL
INSTALLATION MANUAL
CONTENTS
Section 1: Mechanical Installation..............................2 – 9
Section 2 – Electrical Installation................................10 – 20
Section 3 – Cooling Installation..................................21 – 24
Section 4 – Installation Requirements.........................25 – 26
Section 5 – Installation and Start-Up Checklist.............27 – 29
45310 Abell House Lane, Suite 350
E-MAIL:
Product:
SEAKEEPER 1
SEAKEEPER 1
MAY 2020
California, MD 20619
PHONE: +1-410-326-1590
FAX: +1-410-326-1199
customerservice@seakeeper.com
Document #:
Rev:
90519
1
PAGE
Advertisement
Need help?
Do you have a question about the 1 and is the answer not in the manual?
Questions and answers
Question for information. Have always been taught that when drilling & bolting equipment down that whatever the size of hole drilled and tapped for securing that you should have the same amount of metal on each side of the bolt being drilled and tapped into the plate for proper strength of the securing plate. In you case they use a 1/2" bolt for example shouldn't there be at least a 1/2" of metal on each side of the bolt being used. As for a mechanical standard.