Table of Contents
Advertisement
i
K
D
nterface
ey
eScriptionS
ALARM KEY
Lets you access the Alarm menu (some controller models may have a bell icon)
PROGRAMMING KEY
Lets you access the Programming menu (
ESCAPE KEY
Returns to the Status menu or the previous menu (
DOWN KEY
Lets you navigate down through screens and menus or lets you change the value of a field
UP KEY
Lets you navigate up through screens and menus or lets you change the value of a field
ENTER KEY
Lets you confirm a selection and lets you navigate between fields in a screen
NAVIGATION PRINCIPLES
1. Use the
keys to navigate between screens.
2. Once on the desired screen, use the
3. Once on the desired field (blinking cursor), you can change the value using the
Note: Press and hold an arrow key to speed up value change.
4. To confirm your selection, press
WARNING: For certain parameters, which have only two states (ON/OFF, Enable/Disable, Open/Close, etc.), selections will
be applied immediately, without the need to confirm by pressing
When changing those parameters, the system may start inadvertently. Always switch the system off prior to changing any
parameter.
4
Prg
on some controller models)
key to navigate between fields.
key (note that your selection is confirmed only after
Esc
on some controller models)
keys.
.
is pressed).
R
Advertisement
Table of Contents
