Table of Contents
Advertisement
FACTORY RESET PROCEDURE
This procedure will reset the controller to factory settings. It is carried out at the factory before the controller is shipped.
WARNING! The following step will clear your settings and restore those of the factory. DO NOT perform this
operation unless you want to return to the factory settings.
Note to RefPlus factory technician: Always carry out this procedure before setting up the controller.
Note to field technician: If this procedure is carried out, controller must be set-up according to your own specifications.
1. Enter the Programming menu by pressing
2. Use
to scroll the Programming menu and select D) FACTORY SETUP
3. Press
. The display will read:
The screen may prompt you to enter the factory password. Please contact RefPlus to obtain your factory password.
4. Press
.
5. Use
to enter the factory password. Note: If password is not accepted, verify that date and time are set properly.
See page 30 for Clock Adjustment
6. Press
to confirm the password. The display will read:
7. Use
to select FACTORY RESET.
8. Press
. The display will read:
14
. The display will read:
PROGRAMMING MENU
G>VERSION INFO
A>UNIT ON/OFF
B>USER SETUP
ENTER FACTORY PASSWORD
0000
FACTORY SETUP MENU
ALARMS LOGGING RESET
SYSTEM SPECIFICATIONS
DIGITAL INPUTS/OUTPUTS
R
Advertisement
Table of Contents
