2. USER SETUP
1. Enter the Programming menu by pressing
2. Use
to scroll the Programming menu and select B) USER SETUP
3. Press
. The display will read:
The screen may prompt you to enter the user password.
4. Press
.
5. Use
to enter the password. User password is 8.
6. Press
to confirm your selection. The display will read:
7. Press
.
8. Use
to select either
9. Press
to confirm your selection and press
NOTE: The message "Drain temp. must be lower than setpoint" is shown if DRAIN TEMP. is set above SETPOINT.
26
. The display will read:
PROGRAMMING MENU
G>VERSION INFO
A>UNIT ON/OFF
B>USER SETUP
ENTER USER PASSWORD
0000
TEMPERATURE UNIT
Celsius
C (Celsius) or
F (Fahrenheit).
o
o
, the display will read:
TEMPERATURE SETUP
SETPOINT
DRAIN TEMP.:
28.0
o
c
06.0
o
c
R