Table of Contents
Advertisement
96. Use
to select GENERAL STATUS.
97. Press
to confirm your selection. The display will read:
Displays the main screen without needing to exit the factory setup menu.
98. Press
to return to the FACTORY SETUP MENU. The display will read:
99. Use
to select ALARMS LOGGING RESET.
100.
Press
to confirm your selection. The display will read:
The last 100 alarms are logged in the controller's permanent memory. This screen allows to clear the log.
DO NOT PERFORM THIS STEP, unless you really want to clear the alarm log.
101. Press
to exit this screen or press
R
16 : 47 : 48
Status:OFF
CD:000%
Pump status:
Pulsing valve:
Air vent valve:
Drain valve:
Water treatment:
FACTORY SETUP MENU
DEVICES RUN HOURS
GENERAL STATUS
ALARMS LOGGING RESET
ALARMS LOGGING RESET
Are you sure to reset
the alarms logging?
Reset
and then
2020/05/05
OT: 010.0
C
o
FT: 024.7
C
o
OFF
CLOSED
OPEN
OPEN
OFF
to reset the alarms logging.
25
Advertisement
Table of Contents
