Step 4. Connect Power - SureCall Fusion2Go Max User Manual

Vehicle voice and 4g data signal booster

Hide thumbs Also See for Fusion2Go Max:

Table of Contents

SureCall Fusion2Go Max User Guide

Step 4. Connect Power

Connect the power cord connector to the signal booster and insert the other end into your

cigarette lighter adapter

. The Power LED illuminates to show that the signal booster is ready

for use. The Alert LEDs flash 5 times to show the frequency band is operational.

Place a call in a location you have previously experienced poor signal and confirm that your

phone is receiving a boosted signal.

Note: When your car is off, turn the power switch to OFF to keep the booster from continuing

to draw power from your vehicle.

Power

Connector

Power Switch

DC Power

Adapter

[1] WARNING: The booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power

supply. This can damage the booster and/or cause personal injury.

https://www.signalbooster.com | 1-855-846-2654 | or

| order@signalbooster.com

Table of Contents

Do you have a question about the Fusion2Go Max and is the answer not in the manual?

Fusion2go max marine 1Fusion2go max marine 2Fusion2go max desktop/rv 1Fusion2go max desktop/rv 2