Subaru Crosstrek Hybrid 2022 Owner's Manual page 62

58
Charging
Charging screen
1. Remaining charging time
2. Hybrid Battery Charge Status
When the ignition switch is turned to ON
during charging, the charging screen will
display. The remaining charging time and
current charging condition are displayed.
NOTE
If approximately 100 seconds elapse
after the ignition switch is turned to ON
during charging, the ignition will turn
off and the display will also turn off.
! Estimated charging time
The time required to charge the high
voltage battery differs according to the
charging voltage and charging current.
Connected Home power
power source source
Charging
AC 120 V
voltage
Maximum
charging 12 A
current
Estimated
Approximate-
charging
ly 5 hours
time*
*: The time required for charging to complete
depends on conditions such as the remaining
charge of the high voltage battery and the
outside temperature.
NOTE
. In the following situations, charging
time may become longer than normal.
– In very hot or very cold tempera-
tures.
– The vehicle is consuming a lot of
electricity, for example, when the
head lights and other features are
on.
– There is a power outage during
charging.
– There is an interruption in the
electrical supply.
– There is a drop in the voltage of
the external power source.
– The charge in the 12 V battery is
low, for example due to the vehicle
being left unused for a long period
of time.
Public char-
ging station
– The maximum charging current
is set to 8 A on the multi-function
AC 240 V
display. Refer to "Maximum charge
current setting" FP236.
16 A
– When the hybrid battery heating
function operates. Refer to "High
voltage battery heating setting"
Approximate-
FP236.
ly 2 hours
– When the hybrid battery cooling
function operates before charging.
Refer to "High voltage battery cool-
ing screen setting" FP234.
– The air conditioning-linked
setting or remote climate control
was used.
. DC Chargers cannot be used with
this vehicle.
! Charging-linked functions
This vehicle is equipped with several
functions that are linked with charging.
Refer to "High voltage battery settings"
FP234.