Bsd/Rcta Off Indicator - Subaru Crosstrek Hybrid 2022 Owner's Manual

– When there is a difference in height
between your lane and the neighboring
lane.
– Immediately after the BSD/RCTA is
activated by pressing the BSD/RCTA
OFF switch.
– Immediately after the select lever is
shifted to the "R" position.
– When extremely heavy cargo is
loaded in the cargo area.
. During reversing, operation of the BSD/
RCTA approach indicator light and the
warning buzzer may be delayed or the
system may fail to issue these warnings
under the following conditions.
– When backing out of an angled
parking space
– When a large-sized vehicle is
parked next to your vehicle (That
vehicle prevents the propagation of
radar waves.)
– When reversing on sloped roads
– When reversing at a high speed
. The BSD/RCTA approach indicator
light may illuminate when driving close to
solid objects on the road or road side (such
as guardrails, tunnels and sidewalls).
. The BSD/RCTA approach indicator
light may flash when turning at an inter-
section in urban areas or a multilane
intersection.
. The BSD/RCTA approach indicator
light may flash and the warning buzzer
may sound if a building or a wall exists in
the reversing direction.
. In the following cases, the system may
detect a vehicle driving two lanes away
from your vehicle.
– When you are driving on the near
side of its lane from the corresponding
vehicle.
– When the vehicle driving two lanes
BSD/RCTA
away is driving on the near side of its
lane from your vehicle.
& BSD/RCTA OFF indicator
! System temporary stops
1) BSD/RCTA temporary stop message
2)

BSD/RCTA OFF indicator

This display appears when the system is
used under the following conditions.
. Extremely high or low temperatures
. When abnormal voltage exists for the
12 V battery.
. When the radar sensor is significantly
misaligned.
Once the above conditions are corrected,
the system will recover from the temporary
stop condition and the indicator will dis-
– CONTINUED –
341