Shift Lock Function - Subaru Crosstrek Hybrid 2022 Owner's Manual

To deselect "B", move the select lever to
the "D" position.
& Shift lock function
The shift lock function helps prevent the
improper operation of the select lever.
. The select lever cannot be operated
unless the ignition switch is turned to the
"ON" position and the brake pedal is
depressed.
. The select lever cannot be moved from
the "P" position to any other position before
the brake pedal is depressed. Depress the
brake pedal first, and then operate the
select lever.
. Only the "P" position allows you to turn
the push-button ignition switch to the
"OFF" position.
. If the ignition switch is turned to the
"ACC" position while the select lever is in
the "N" position, the select lever may not
be moved to the "P" position without
depressing the brake pedal and pressing
the select lever button.
! Shift lock release
If the select lever cannot be operated, turn
the ignition switch back to the "ON"
position, then move the select lever to
the "P" position with the select lever button
pressed and the brake pedal depressed.
If the select lever does not move after
performing the above procedure, check
and confirm the following and release the
shift lock accordingly.
. When the select lever cannot be
shifted from "P" to "N":
Refer to "Shift lock release using the shift
lock release button" FP315.
. When the select lever cannot be
shifted from "N" to "R", "P":
Place the ignition switch in the "ACC"
position, then move the select lever to the
"P" position with the brake pedal de-
pressed.
If the select lever still does not move, refer
to "Shift lock release using the shift lock
release button" FP315.
If the shift lock cannot be released without
using the shift lock release button in the
above cases, there may be a malfunction
in the shift lock system or the vehicle
control system. Contact a SUBARU dealer
for an inspection as soon as possible.
! Shift lock release using the shift
lock release button
Perform the following procedure to release
the shift lock.
1. Apply the parking brake and turn the
ignition switch to the "OFF" position.
Continuously variable transmission
2. Wrap the tip of a flat-head screwdriver
with vinyl tape or a cloth and use it to
remove the shift lock cover. The shift lock
release button is located under the shift
lock cover.
3. Remove the grip portion of the screw-
– CONTINUED –
315