Canceling The Reverse Automatic Braking (Rab) System Operation - Subaru Crosstrek Hybrid 2022 Owner's Manual

WARNING
Depress the brake pedal immedi-
ately after the system stops the
vehicle by automatic braking. De-
pending on the conditions of the
road surface and tires, the vehicle
may not remain stopped, possibly
leading to an unexpected accident.
! After the vehicle is stopped by the
system
After the brake pedal is depressed, the
RAB OFF indicator will illuminate and the
system will temporarily stop operating.
The RAB OFF indicator will turn off when
the select lever is shifted to a position other
than the "R" position.
The system will operate again the next
time the select lever is shifted to "R"
position.
NOTE
. After the vehicle has been stopped
by the Reverse Automatic Braking
(RAB) system, brake control is released
and the electronic parking brake oper-
ates in the following cases. For details
about releasing the parking brake, refer
to "Electronic parking brake" FP331.
– 2 minutes pass after the vehicle
is stopped
– Any door is opened
. The Reverse Automatic Braking
(RAB) system may stop operating tem-
porarily in the following cases and the
RAB OFF indicator will illuminate.
– Ice, snow or mud is adhered to
the sonar sensors or the rear bum-
per near the sonar sensor.
– Objects are too close to the rear
bumper when the select lever is set
to the "R" position.
– The system detects sounds of a
similar frequency to the Reverse
Automatic Braking (RAB) system
sonar.
Reverse Automatic Braking (RAB) system
& Canceling the Reverse Auto-
matic Braking (RAB) system
operation
The Reverse Automatic Braking (RAB)
system can be temporarily canceled by
any of the following operations.
. While the vehicle is stopped by the
operation of automatic braking, the brake
pedal is depressed.
. While the vehicle is stopped by the
operation of automatic braking, the accel-
erator pedal is depressed.
. The accelerator pedal is kept de-
pressed (In this case, limited acceleration
will be canceled and the vehicle will
continue reversing.)
. The select lever is shifted to a position
other than the "R" position.
NOTE
The system will be canceled if the
object is no longer detected.
353
– CONTINUED –