When The Remote Battery Charging Timer Does Not Operate Normally - Subaru Crosstrek Hybrid 2022 Owner's Manual

70
Troubleshooting
Symptom
The charging indicator
flashes and charging cannot
be carried out.
*: For details regarding charging indicator illumination and flashing, refer to "
& When the Remote Battery Charging Timer does not operate normally
Symptom
Cannot charge at desired
time.
Cannot change timer setting
from MySubaru application.* The smartphone is outside its coverage area.
Likely cause
When charging indicator slowly flashes*:
Charge schedule is registered.
When charging indicator rapidly flashes*:
Malfunction occurred in an external power source or the
vehicle.
Likely cause
The vehicle clock is not properly adjusted.
The charge cable is not connected to vehicle.
An incorrect charging mode was selected.
When you wish to charge according to the timer, wait until
the set time.
To immediately start charging, set "Charge Now" to "On".
Refer to " Setting the Remote Battery Charging Timer" FP66.
Or, while the charging indicator is flashing, remove and
reconnect the charging connector within 5 seconds.
Start the hybrid system and follow the instructions
displayed by the message on the combination meter
display (color LCD).
Charging indicator" FP52.
Check the clock settings and adjust it to the proper time.
Refer to " Clock" FP241.
Before using the charging timer, connect the charge cable.
Check the charging mode setting. Refer to "
Remote Battery Charging Timer" FP64.
When the charging mode is "Start time", charging starts at
the set time, but when it is "Departure time", charging is
completed by the set time. (The charging start time is
automatically controlled by the system.)
Check the signal strength. If the smartphone is outside its
coverage area, move to a place with a better signal.
Correction procedure
Correction procedure
Using the