Subaru Crosstrek Hybrid 2022 Owner's Manual page 240

236
Multi-function display (color LCD)
any position other than "P".
– The remote climate control sys-
tem is operated.
– "Charge Now" is implemented.
– The amount of remaining charge
in the high voltage battery is below a
certain amount.
. The high voltage battery cooling
function uses the power of the external
power source. While the high voltage
battery cooling function is operating,
the amount of the remaining charge of
the high voltage battery increases and
decreases in a certain range, and does
not increase as in normal charging.
! High voltage battery heating
setting
When the outside temperature is low and a
charge cable is connected to the vehicle,
this function automatically heats up the
high voltage battery to a certain tempera-
ture.
1. The setting procedure is the same as
battery cooling setting, but select the "High
voltage battery heating setting" item in
step 1.
NOTE
. When the charge cable is removed
from the vehicle or remains connected
to the vehicle for approximately 3 days,
the system automatically stops.
. When Remote Battery Charging
Timer is used, this function will operate
according to the timer settings.
. When the high voltage battery heat-
ing function is operating, the charging
indicator illuminates.
. When the high voltage battery heat-
ing function is operating during char-
ging, the charging time may be longer
than normal.
. If the outside temperature becomes
high while the high voltage battery
heating function is operating, charging
may complete earlier than the "Depar-
ture time" setting.
. When the high voltage battery is
extremely cold (below approximately
−228F (−308C)) under the influence of
the outside temperature, it may not be
possible to start the hybrid system. In
this case, try to start the hybrid system
again after the temperature of the high
voltage battery increases due to the
outside temperature increase etc.
! Charge settings
Set the functions related to charging.
! Charge timer settings
Set the Remote Battery Charging Timer.
For details, refer to "Using the Remote
Battery Charging Timer" FP64.
! Maximum charge current setting
Set the value of the maximum charge
current while charging.