Advertisement
Attach the six carcass
runners (K) to the inside
faces of the left and
K
right side panels (6&7).
When fitted the wheel
on the carcass runners
must point towards the
front of the dresser,
away from the recesses
in the back edges of the
7
side panels. Align the
holes in the side panels
with the holes in the
carcass runner, see
diagram.
Screw in two euro
L
screws (L) to secure
each carcass runner.
Tighten them using a
cross-head screwdriver.
6
K
C
Screw four cam studs
(C) into the lower holes
in the inside faces of the
left and right side panels
using a cross-head
screwdriver, see
diagram.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
– 9 –
Advertisement
