Download Print this page

Mamas & Papas murano dresser/changer Instructions Manual page 19

Advertisement

Align the runners on the
drawers with the runners
on the dresser sides and
slide them in.
The dresser is now
finished and ready for
use. Ensure that all
fittings are correctly
tightened before use.
The wall strap is only intended to be used with the Mamas and Papas product that it is
supplied with.
Never attempt to modify or change the wall attachment strap in any way. Never use any
other fittings for attaching the strap to your furniture than those supplied.
Never use the screw provided to attach the strap to the wall. No wall attachment fittings
are supplied. This is because the type of fittings required to attach the strap to the chosen
wall is determined by the walls composition. If you are in any doubt about the correct type
of fittings to use, consult a professional before attempting to attach the strap to the wall.
The wall strap must not be used to replace any other fitting supplied with your piece of
furniture.
Furniture falling over is generally due to the surface the furniture is placed on. A warped
floor or wall-to-wall carpeting will enable the furniture to rock, so greatly increasing the
potential for the furniture to fall. If the furniture is placed on a flat level wood or tiled floor
the risk is reduced, but we still recommend the wall strap is fitted.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
WALL STRAP INFORMATION
– 19 –

Advertisement

loading