Advertisement
Screw two cam studs (C)
into the holes in the
inside faces of the left
changing rail (15) and
the right changing rail
(16), see diagram.
Screw three cam studs
into the holes in the
inside face of the back
changing rail (13)
Tighten the cam studs
using a cross-head
screwdriver.
Align the three dowels in
the edge of the top back
section (12) with the
holes in the back edge of
the top and slot them
together. Ensure the
large holes in the top
back section face
towards the bottom of
the dresser.
Align the cam studs in
the back changing rail
(13) and the dowels in
top back section with
relevant holes and slot
them together.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
15
13
13
12
– 17 –
16
C
Advertisement
