Advertisement
M
Slot four carcass cams
(M) into the large holes
in the inside faces of
both of the left and right
side panels (6&7).
Note: carcass cams have
a narrower head than
the drawer cams (B)
7
supplied in the fittings
pack.
Ensure that the arrow on
the heads of the carcass
cams point towards the
connecting holes.
6
8
Select the two bottom
8
rails (8) and insert four
dowels (A) into the
ends.
You may need to gently
tap the dowels fully into
position using a light
hammer.
A
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
– 10 –
Advertisement
