Advertisement
Attach the drawer
handle to the drawer
front by inserting two
handle screws (E)
E
G
F
through the holes in the
drawer front, see
diagram.
Slot two handle spacers
(F) onto the threaded
ends of the handle
screws.
Align the ends of the
handle screws with the
holes in the drawer
handle (G) and slot them
together. Tighten the
handle screws into the
handle using a flat-head
screwdriver.
Attach the two drawer
runners (I) to the
bottom edges of the left
and right drawer sides
(1&2).
H
The wheel on the
I
runners must point
towards the back of the
drawer. Align the holes
in the side panels with
the holes in the drawer
runner, see diagram.
Screw in three short
screws (H) for each
drawer runner (I).
Tighten them using a
cross-head screwdriver.
Repeat steps 1 to 8 to
assemble the two
remaining drawers.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
– 7 –
Advertisement
