Advertisement
Slot four carcass cams
(M) into the large holes
in the bottom rails (8).
Ensure that the arrow on
M
8
the heads of the carcass
cams point towards the
connecting holes.
8
8
Lay the right side panel
(7) flat on a clean, level
7
work surface and slot
the bottom rails (8) onto
it, see diagram.
Align the cam studs in
the side panel and the
dowels in the bottom
rails with the relevant
holes and slot them
together.
Tighten the two carcass
cams (M) in the bottom
rails using a flat-head
screwdriver to securely
attach the components.
M
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
– 11 –
Advertisement
