Advertisement
7
Carefully turn the
assembled components
over, so that the front
edge of the dresser
carcass faces down, see
diagram.
Align the cam studs in
the left side panel (6)
and the dowels in the
bottom rails with the
6
relevant holes and slot
them together.
Tighten the two carcass
cams (M) in the left side
panel using a flat-head
screwdriver to securely
M
attach the components.
Screw four cam studs
9
(C) into the holes in the
underside of the top (9),
see diagram. Tighten
them using a cross-head
screwdriver.
Note: If you are not
going to use this product
as a changing station fit
the wall strap as shown.
Attach the wall strap (Q)
C
Q
to the back of the top
using the washer and
screw provided.
If you are going to use
this item as a changing
station attach the wall
strap later as shown in
step 29 (page18).
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
– 12 –
Advertisement
