SAN REMO HIGHCHAIR IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE • Do not discard any packaging until you have all the components. • Read the instructions before constructing the product then follow them step by step. COMPONENTS Seat Tray...
Page 3
Cross-head screwdriver. ATTACHING THE TRAY Position the seat unit flat on a level work surface with the back of the seat facing down. Position the tray face down on the front of the seat, then rotate the tray frame on the seat unit over the underside of the tray.
Cross-head screwdriver. ATTACHING THE FOOTREST Position the seat and tray unit flat on a level work surface with the tray facing down. Slot the footrest onto the ends of the metal frame. Depress the two locking buttons on the frame. Push the footrest onto the frame until the buttons lock into the...
Page 5
ATTACHING THE FRONT LEGS Plastic moulding Slot the front legs into the outer holes in the plastic mouldings. Ensure that the buttons on the front legs are aligned with the holes in the plastic mouldings. Push the front legs in until the locking buttons protrude through the holes in the plastic...
Page 6
OPENING THE HIGHCHAIR Stand the highchair upright. Lift the tray up then pull the front and rear legs away from each other. Lower the tray on to the front section of the frame. – 6 –...
Page 7
LOCKING THE TRAY IN POSITION Push the frame lock under the tray down over metal frame. Ensure that the frame lock is fully engaged before placing your child in the highchair by attempting to pull the tray upwards. The tray must stay attached to the metal frame.
OPERATING THE HARNESS Locking the harness: Push the tongues on the Waist ends of the waist strap strap Tongue into the buckle. The harness will automatically lock when the tongues have been fully pushed in. Adjusting the length of the harness: Slide the buckles on the waist strap and shoulder straps...
ADJUSTING THE TRAY Locate the two tray adjustment handles located on the sides of the tray. Pull both of them out then slide the tray into the desired position. Release the adjustment handles to lock the tray into one of the four positions.
FOLDING THE HIGHCHAIR To disengage the frame lock, lift the tab on the bottom lock upwards. Lift the tray section upwards from the frame. – 10 –...
Page 11
FOLDING THE HIGHCHAIR Lift the tray clear of the frame then pull the front and rear legs together. Lower the tray over the footrest. The legs and the footrest can be removed for compact storage. Depress the locking buttons used to secure the legs and footrest to the frame, then pull to separate...
Daytime Tel. No............... Email..................Baby’s due date/date of birth ............................. Product purchased San Remo Highchair......Purchase date ......Price ........If you would like to receive further information regarding new products, promotions and special offers from Mamas & Papas please tick the boxes indicating your preferred method(s) of contact.