Scraper Removal (continued)
Scraper Installation
Drive System: Service and Repairs
g321395
3. Remove the 2 (3/8-16 x 2 1/2 inch) shoulder bolts securing the scraper to the
auger housing. Remove the scraper from the auger housing.
g321396
1. Flip the machine over so the auger housing is facing the floor. Install the
scraper onto handle auger housing . Install the 2 (3/8-16 x 2 1/2 inch)
shoulder bolts securing the scraper to the auger housing.
Figure 86
Figure 87
Page 6–14
POWER CLEAR® 721/821 Snowthrower Service Manual
3438-776 Rev A