Paddle Removal (continued)
Paddle Installation
Drive System: Service and Repairs
g321394
1. Install the paddles to the rotor assembly so that the thicker rubber layer is
assembled to the forward facing side of the rotor assembly. Install the 4
(1/4-20 x 1 1/2 inch) screws, 4 spacers, and 4 washers securing the paddles
to the 2 paddle spacers.
g327312
Figure 82
Figure 83
Page 6–12
POWER CLEAR® 721/821 Snowthrower Service Manual
3438-776 Rev A