Toro POWER CLEAR 721 Service Manual page 29

Engine Removal (continued)
POWER CLEAR® 721/821 Snowthrower Service Manual
3438-776 Rev A
g324731
8. Remove the rotor pulley assembly from the rotor shaft.
9. Remove the belt from the engine pulley and rotor pulley.
10. Remove the (5/16–24 x 1 1/4 inch) screw and Belleville washer securing
the engine pulley to the engine shaft. Remove the engine pulley from the
engine shaft.
g321398
11. Remove the 4 (M8 x 1.25 mm x 5/8 inch) bolts securing the engine to the
engine plate.
Note: Bolts are located inside the belt housing.
Figure 5
Figure 6
Page 4–5 Engine: Service and Repairs