Toro POWER CLEAR 721 Service Manual page 43

Fuel Tank Removal (continued)
Fuel Tank Inspection
Fuel Tank Installation
POWER CLEAR® 721/821 Snowthrower Service Manual
3438-776 Rev A
g322779
7. Pivot the fuel tank to gain access to the fuel line. Slide the clamp away from
the fuel filter and remove the fuel line from fuel filter fitting.
g323984
1. Clamp
8. Remove the fuel tank from the engine.
9. If needed, unscrew and remove the fuel filter from the fuel tank.
1. Inspect the fuel tank for rust, corrosion, or leaking on the inside and outside
of the fuel tank. Replace the fuel tank if damaged.
2. Inspect the fuel filter for contamination, blockage, or if compromised. Replace
the fuel filter if damaged.
1. Ensure the inside of the fuel tank, tank outlet fitting, and fuel filter fittings are
all clean. Install the fuel filter to the tank outlet.
2. Connect the fuel hose to the fuel filter fitting and secure with the clamp.
Figure 32
Figure 33
Page 4–19 Engine: Service and Repairs