Toro POWER CLEAR 721 Service Manual page 55

Shroud Removal (continued)
POWER CLEAR® 721/821 Snowthrower Service Manual
3438-776 Rev A
g320930
5. Remove the 2 (1/4-20 x 1 inch) screws securing the front of the shroud to
the auger housing.
6. Remove the 3 (M4.2 x 2.25mm x 3/4 inch) screws securing the RH shroud
to the side cover.
g320931
7. Remove the 2 (#6 x 2.5 inch) screws and 2 hex nuts securing the shroud to
the switch box. Remove the shroud from the machine.
Note: Remove the starter plug from the shroud, if equipped with electric start.
Figure 44
Figure 45
Page 5–9 Chassis: Service and Repairs