Toro POWER CLEAR 721 Service Manual page 35

Electric Starter Installation (continued)
POWER CLEAR® 721/821 Snowthrower Service Manual
3438-776 Rev A
2. Install the electric starter by inserting the nose of the starter into the blower
shroud and slide the mounting holes over the dowel pins. Install the 2 (M6 x
35) bolts securing the electric starter to the engine. Torque the bolts to 10
N • m (89 in-lb).
g323978
3. Wrap the harness clip around the electric starter wire.
g323979
4. Install the 2 (#6 x 2.5 in) screws securing the electric starter switch box to the
shroud. Torque the screws to 6.78 N • m (60 in-lb).
5. Install the engine onto the machine.
Figure 17
Figure 18
Engine Installation (page 4–7)
Page 4–11 Engine: Service and Repairs