Toro POWER CLEAR 721 Service Manual page 56

Shroud Removal (continued)
Shroud Installation
Chassis: Service and Repairs
g320932
1. Install the shroud onto the machine. Install the 2 (#6 x 2.5 inch) screws and 2
hex nuts securing the shroud to the switch box.
Note: Install the starter plug to the shroud, if equipped with electric start.
g320932
2. Install the 3 (M4.2 x 2.25mm x 3/4 inch) screws securing the RH shroud
to the side cover.
Figure 46
Figure 47
Page 5–10 POWER CLEAR® 721/821 Snowthrower Service Manual
3438-776 Rev A