Advertisement
(4)
4.3.3
Bottom View
Air Outlet
Indoor Unit
Side View
Suspension Bolt
(1) Pattern Board for Installation is
provided in the packing，please cut it
off.
（mm)
Refrigerant
Outlet Pipe
10
Pattern Board for Installation
Checking Scale 01
(2) Adjust the distance between indoor
unit and ceiling.
Adjust the indoor unit to a proper
position with the checking scale provided
by the factory
Indoor Unit
Dimension of
Opening
Connected to Indoor Unit
Fig. 4.7 Adjustment of Distance to Indoor Unit
(3) Cutting the Ceiling
Mount ceiling opening to the indoor unit with
screws (four) by using Pattern Board. Cut the
ceiling based on opening dimension of the
pattern board and mount the panel.
Pattern Board
After installation is completed, remove the
pattern board off the ceiling.
Checking Scale 02
Ceiling
Supported by
Surface of Ceiling
Dimension of Opening
Adjustment Range
3-4mm
Panel Fixing Screw
Bolt M6
(Panel Accessories)
Advertisement
