Subscribe to Our Youtube Channel
Related Manuals for Hisense AVC-05HJFA
Summary of Contents for Hisense AVC-05HJFA
- Page 1 Mini 利 批准： △ BZ/KF 1 201 .0 . 宋振兴（代） × 陈 苑志超 宋振兴 △ BZ/KF 1 12-009 201 .12. 3 ×1 李虎 变更内容简要描述 对Fig. 4.3图进行了修正 冷媒拨码指示改为DSW5，地址改为N0.5 9981 yuanzhichao@hisensehitachi.com...
-
Page 2: Mini 4-Way Cassette Type
Operation, Installation & Maintenance Manual MINI 4-WAY CASSETTE TYPE AVC-05HJFA AVC-07HJFA AVC-09HJFA AVC-12HJFA AVC-15HJFA AVC-17HJFA AVC-19HJFA THANK YOU FOR PURCHASING HISENSE CENTRAL AIR CONDITIONER. PLEASE READ AND M00131Q UNDERSTAND THIS MANUAL BEFORE USING THE AIR ORIGINAL INSTRUCTIONS CONDITIONER. KEEP THIS MANUAL FOR FUTURE REFERNECE. - Page 4 Manufacturing number and manufacturing year: refer to model Nameplate. Notes: This declaration becomes invalid, if technical or operational modifications are introduced without the manufacturers consent. Hisense Italia S.r.l. is authorised to Compile the Technical Construction File. Ad. : Via Montefeltro 6A, 20156 Milano. Name, Surname Position/ Title...
-
Page 6: Important Notice
This manual describes and introduces this heat pump air conditioner in a unified manner, so it's applicable for your and other air conditioners. Hisense pursues a policy of continuous improvement in design and performance of products. The right is therefore reserved to change specifications without notice. - Page 7 DANGER Please don't perform installation works such as refrigerant piping connection, drain pipe connection, and wiring connection. Violations may result in system leakage, electrical failure or fire. In the case of fire, please turn off the power immediately; please don't touch electrical parts with the hands, or electric shock may arise. Do not pour water into the indoor or outdoor unit.
-
Page 8: Correct Disposal Of This Product
Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. - Page 10 1.Safety Precautions Tools & Instruments for Installation Transportation & Handling 3.1 Transportation 3.2 Handling of Indoor Unit Installation of Indoor Unit 4.1 Factory-Supplied Accessories 4.2 Initial Check 4.3 Installation Refrigerant Piping Work 5.1 Piping Materials 5.2 Piping Connection 6.Drain Pipe Electrical Wiring 7.1 General Check 7.2 Wiring...
-
Page 11: Instructions For Handling
Do not install the indoor unit, outdoor unit, Do not perform installation work, refrigerant piping remote control switch and cable work, drain piping and electrical wiring connection within approximately 3 meters from strong without referring to the installation manual. electromagnetic wave radiators such as Check that the ground wire is securely connected. -
Page 12: Initial Check
Do not install the indoor unit in a machinery 4.2 Initial Check shop or kitchen where vapor from oil or its mist flows to the indoor unit. Install the indoor unit in a space for easy operation Once the oil deposits on the heat exchanger, it and maintenance as shown in Fig. - Page 13 4.3.3 Mounting the Indoor Unit For Steel Beam For Concrete Slab Mount the indoor unit as shown in Fig. 4.4. 150 to 160mm Screw in Mount field-supplied parts (100 to 150kg) Suspension bolt 4-M10 or W3/8 Concrete 8-M10 or W3/8 Suspension Bolt Washer 8-M10 or W3/8...
- Page 14 4.3.4 Adjust the Distance between Indoor Unit (b) For ceiling without panel and Ceiling Pattern Board for Installation Please cover the machine with plastic cloth to keep it clean during installation. Check the level of water pan using a water level to avoid incorrect installation of drain discharge mechanism.
-
Page 15: Piping Connection
(2) As shown in Fig. 5.4, two spanners shall be used for 5.2 Piping Connection tightening the nut (1) The connection point and diameter of piping are shown in Figs. 5.1 and 5.2. 144 (Liquid Pipe) Tightening Torque (N.m) Pipe Size 93 (Gas Pipe) Φ6.35 Φ9.53... - Page 16 (1) The position of the drain pipe connection is shown in Fig. 6.1. Where the relative humidity of air inlet or (2) Prepare a polyvinyl chloride pipe with a ambient air exceeds 80%, an auxiliary water pan 32mm outer diameter. shall be fabricated at installation site and placed (3) Fasten the tubing to the drain hose with the under the indoor unit, as shown in Fig.
- Page 17 7.2 Electrical Wiring Connection The electrical wiring connection for indoor unit is shown in Fig. 7.1. Turn OFF the main power switches to the indoor (1) Connect transmission wiring to the PBC unit and outdoor unit before electrical wiring or in electrical box through the connection hole periodical check, and wait for at least three on electrical box.
- Page 18 Clamp for Clamp for Transmission Wiring Clamp Power Wiring Power Wiring Transmission Wiring Circuit Board <Power Wiring> Transmission Wiring Clamp for Transmission Wiring Cord Clamp 220-240V 50HZ /60Hz Fig. 7.1 Electrical Wiring Connection for Indoor Unit 7.3 Specifications of Power Cords for Field Connection, Electrical Parameters of Indoor Unit, and Wire Size Note: (1) Field wiring shall be in conformity to local laws and regulations, and all wiring operations must be performed by qualified professionals.
- Page 19 (6) A switch that can ensure all-pole disconnection shall be installed between power supply and air conditioning unit in such a manner that the contact spacing shall not be less than 3mm. (7) Once the power cord is damaged, the dealer or the professionals from designated maintenance department must be contacted in a timely manner for repair and replacement.
-
Page 20: Setting Of Dip Switches
10.1 Setting of Dip Switches (c) Safety reset (DSW7) Factory settings (1) DIP switch must be set with power sources of the indoor and outdoor units in OFF state. Otherwise, the settings are invalid. Once strong current is (2) The DIP switches are located as shown in the accidentally connected to figure below. - Page 21 Insulating Pipe (Big): 1 pc Insulating Pipe (Small): 1 pc Sealing Gasket (Big): 1 pc Sealing Gasket (Small): 1 pc 1006335 Add: 218, Qianwangang Road, Economic & Technical Development Zone, Qingdao, P. R. China http: //www.hisense-vrf.com E-mail: export@hisensehitachi.com M00131Q 2018.12...
Need help?
Do you have a question about the AVC-05HJFA and is the answer not in the manual?
Questions and answers