Advertisement
Maintenance and Repair
Cleaning the Machine Body
Use a soft, damp cloth to clean the exterior parts of the unit. Do not use any soap or solvents.
Procedure for filter maintenance
The dust and obstacles on the filter should be removed regularly. You may need to clean and
replace the filter.
Step:
1. Unplug the unit.
2. Remove the filter by sliding it upward from the bottom byhand to remove it.
3. Check for dirt and build-up.
4. For MERV-8 or Pre-filter, wash it in warm water or vacuum it. Do not use soap or cleaners. Also,
shake it gently and ensure the filters are dry before reinserting it.
Advertisement
