Download Print this page

ALORAIR STORM PRO User Manual page 6

Hide thumbs Also See for STORM PRO:

Advertisement

How Your Storm Dehumidifier Works
The Storm Pro dehumidifier /The Storm Ultra dehumidifier utilize its integral humidistat to
monitor the conditioned space. Once conditions are outside the desired setpoint, the
compressor energizes and air is drawn across an evaporator coil. The evaporator coil is cooler
than the dew point of the air so water vapor will turns into liquid condensation. The air is then
reheated through the condenser coil and distributed back into the room.
Electrical Supply
WARNING
240
Volts may cause serious injury from electric shock.
Power Supply:
Outlet Requirement:
Circuit Protector:
1. Disconnect electrical power before servicing
2. Only plug unit into grounded electrical outlet
Installation
Place the Pro in your desired location. The inlet of the machine should be at least 8"
from any obstructions. If the unit has been transported in a horizontal position, allow it to
sit in an upright position for at least 30 minutes before operating.
WARNING
Do not use dehumidifier in an environment where corrosive or high VOC materials are applied.
115V, 60 Hz AC Only 1 Phase
3-Prong, GFI
15 Amp Time D elay F use o r Circuit Breaker
3. Do not use an extension cord
4. Do not use a plug adapter

Advertisement

loading

This manual is also suitable for:

Storm ultra