Phone settings
Ringer volume
You can adjust the ringer volume using the ring volume control (20) (refer
to "Overview of Your Phone").
Phone book
Thirty-two phone numbers can be stored in the phone book together with
the associated names.
•
Always enter the area access code with the phone numbers so that
the telephone can also assign incoming local calls to a phone book
entry.
•
When the memory capacity of the phone book is used up, the
message MEMORY FULL appears when an attempt is made to
store another number. To create space, an existing entry must first
be deleted.
•
The phone book entries are arranged alphabetically. To skip to the
required phone book entry directly, enter the first letter of the
corresponding entry.
Entering a name
The digit keys are also labelled with letters for the entry of the respective
letters.
Pressing the respective key the necessary number of times enables
capital letters and digits to be entered.
Enter a space by pressing
.
Insert a special character with
Delete a character by pressing
To enter the same letter twice, press the button to enter the letter.
Wait until the cursor skips one place forward. Enter the letter again.
Creating phone book entries
•
Press
.
•
Press
and confirm SAVE? by pressing
•
Enter the telephone number and press
•
Enter the name and press
or
.
C
.
.
.
.
14
Editing entries in the phone book
•
Press
and select an entry using
•
Press and hold
for approx. 3 s and confirm EDIT? by pressing
.
•
Enter the new telephone number if necessary and confirm with
•
Enter the new name if necessary and confirm with
Deleting a single entry from the phone book
•
Press
and select an entry using
C
•
Press
. The display shows DELETE?.
C
•
Press and hold
for approx. 4 s. Entry is deleted.
Delete all entries from the phone book
•
Press
and select an entry using
C
•
Press and hold
for approx. 4 s.
The display shows DELETE ALL?.
C
•
Press and hold
for approx. 4 s. again.
Note: To abort a setting without any change press the CID button.
Quick dialing
You can store up to 10 phone numbers so that they can be dialled simply
by quick dialling.
Programming quick dial buttons
•
Press
.
•
Enter the telephone number and press
•
Enter the name and press
•
Press the digit key, the quick dialling number should be assigned to.
Note: For dialling a telephone number using the quick dialling feature
please refer to page 16.
Note: The phone numbers assigned to the quick dial buttons cannot be
deleted. When storing new numbers, the existing entries are overwritten.
and
.
.
and
.
and
.
.
.
15
.